Skip to main content

 

Electronic Theatre Controls Inc

ETCNet2 Two Port DMX Node Information

The ETCNet2 Two Port Node was available as either a wallmount (backbox mounting) version or as a touring version with either two male or two female 5-pin XLR connectors. Similarly to other Net2 products the connectors can be inputs or outputs irrespective of their gender.

Two Port Wallmount Node

Two Port DMX.jpg

Two Port Touring Node 
Two Port Touring.jpg

The node took either a 24V DC input on a two pin header (wallmount) or DC barrel connector (touring), or could in both cases be powered by Power-over-Ethernet. 

The Two Port Node was obsoleted by the introduction of the Net3 2 Port Gateway in 2008. 

  • Was this article helpful?