Skip to main content
Electronic Theatre Controls Inc

FHHR - Joystick Calibration

Explanation

If the Joystick on the FHHR i snot acting appropriately we suggest the you re-calibrate it.

Steps to Solution

  1. With the FHHR powered up
  2. Press Log out
  3. Press Exit
  4. Press Exit
  5. Press the 3 and 4 key for 3 seconds
  6. This will bring up the joystick calibration screen
  7. Press the clear button
  8. With the joystick in the center press the center button
  9. Push the joystick all of the way up and press up button
  10. Push the joystick all of the way down and press the down button
  11. Press the close button
  12. Press the search button to launch the FHHR.
  • Was this article helpful?