Skip to main content

 

Electronic Theatre Controls Inc

Disabling Pan and Tilt Before Homing on SolaSeries

Reasons for Disabling Pan and Tilt

If a fixture is close by other objects that could obstruct its homing or to quickly get through homing to be able to address the fixture or to manually control the fixture with pan/tilt motors disengaged

 

To Disable Pan/Tilt

Begin with the fixture powered off

Before applying power hold down the left and right arrows simultaneously and then switch power on

Wait for the fixture to complete homing before releasing the left and right arrows

 

Note: To be able to use Pan/Tilt normally again, you will need to cycle power on the fixture and let it re-home

  • Was this article helpful?