Skip to main content

 

Electronic Theatre Controls Inc

SolaPix 19 does not take software upload

The Solapix 19 will not upload the latest software to the 2U board (pan and tilt board)

The new pan  and tilt  board has boot code Version 13 and needs to be change to boot code Version 14

The software below will change the boot code from Version 13 TO  Version 14

Refer to the read me files in the software below to assist with the upload.

    Here is the software to change boot codes...SolaPix19-Ver-1-4-1-E.zip to be able to upload boards.zip

    • Was this article helpful?