Skip to main content
Electronic Theatre Controls Inc

Echo Contact Interface/Room Controller Contact In Push and Hold and Double-Tap Timing

Issue

By using the EchoAccess Mobile App, a Gen 2 Echo Room Controller's Contact Input can be configured as Maintained or Momentary, when the panel is set to Custom mode. 

When set to Momentary, you can assign a "push" action, a "push and hold" action, and a "double-tap" action.  In order to trigger these actions you would need to close the contact for a set period of time.

Explanation of Momentary Actions

Any state should be held over 100 milliseconds to guarantee it registers.

If the contact is closed for 100-900 milliseconds (less than 1 second), it is considered a "push" action.

If the contact is closed for 1000 milliseconds (1 second) or longer, it is considered a "push and hold".

If the contact is closed for a second time within 100-200 milliseconds of the initial momentary closure, this would act as a "double-tap" and perform the "double-tap" action.

 

See the Related Link for action options.

  • Was this article helpful?