Skip to main content
Electronic Theatre Controls Inc

Disabling sACN on Echo Power Control Processor


I need my Echo Relay Panel, Sensor IQ, or EchoDin to be on the network, but I don't want it to respond to sACN.

Disabling sACN:

  1. Press the Checkmark button to go into the Main Menu
  2. Navigate to Arch Setup>Network Settings>sACN Universes
clipboard_e1d09a775904b3cfffa1393776f888e15.png clipboard_e3f1b5c2a0e9ecc980194d3faee33dc04.png clipboard_e38ad9ee07f8c247c23600b0ab3c0a82f.png
  1. Select each universe and set it to "0"
    1. This should result in a "--" on each Universe