Uploading and Downloading a Mosaic Configuration via the WebUI

Issue

When uploading a configuration file to a Mosaic processor via the WebUI, you must have a special file (not simply the .md2 file you have written in Mosaic Designer)

Solution

1. Open your configuration in Mosaic Designer
2. Go to the "Network" tab and select the processor.  Then select "Properties" on the right.
3. Scroll down to "Actions" and Choose "Export Project for Upload..."
4. Select a file location you will remember.  Choose "Next."
5. Check boxes for all resources that must be included in the file.  Press "Next."
6. Choose "Save."
7. A file ending in .upload.md2 will be generated.
8. Now you are ready to upload this file via the WebUI

NOTE:  Any Mosaic Touchscreen (MTS, MTS-5, or MTS-8) will require the use of Mosaic Designer to upload configuartion changes.  Mosaic Touchscreeens do not support any kind of hardware manipulation or configuration changes via the webui.

Uploading via the WebUI

1. Connect to the controller's WebUI by entering the IP of the controller in the address field of a Web Browser.  For information on compatible browsers see Mosaic Web Interface Doesn't Work with Internet Explorer.
2. Navigate to "Configuration" at the top of the page.
3. Next to the word "Project" choose "Upload"
4. Select the file you created above that ends in .upload.md2

Downloading via the WebUI

1. Connect to the controller's WebUI by entering the IP of the controller in the address field of a Web Browser.  For information on compatible browsers see Mosaic Web Interface Doesn't Work with Internet Explorer.
2. Navigate to the "Home" tab at the top of the page or the "Configuration" tab. 
   1. If you are using the "Configuration" tab, scroll to the bottom of the page. 
3. Next to the word "Project" choose "Download"
4. Select which resources of the file you wish to save and click download.
5. The file will save to your default downloads location.