How Do I Get ETCLink Messages in My Emphasis System?
The information in this post is provided to assist in troubleshooting. Perform work at your own risk. ENSURE ANY POWER FROM DEVICES HAS BEEN DISCONNECTED BEFORE SERVICING ANY EQUIPMENT. If you do not feel comfortable performing the work, please contact us or your local service center. Be aware that ETC and its Affiliates are not responsible for any damage or injury caused by service of our products by anyone other than us or our authorized service providers, and such damage is excluded from the product’s warranty.
Question
If I can't use the ETCLink Port on the back of the Facepanel, how do I get Link messages into and out of the system?
Answer
The only way to get Link messages from the racks onto the wire is to connect them to a node that has an ETCLink port. (the facepanel does not count in this case)
Link functionality in Emphasis will be WYSILink only. Error messages can be seen on the server screens in the LINK mode.