Skip to main content
Electronic Theatre Controls Inc

DHCP (Network Address) Server on ETCNomad for PC and Mac

Issue

ETCnomad appears to not be usable as a DHCP server, and the DHCP section of the Shell (ECU in Eos, System Settings in Cobalt) is greyed out.

Explanation of Issue

On a PC, ETCnomad for Eos or Cobalt utilizes GCE's (Gateway Configuration Editor) Net3 Services for its Network Address Server.  In order for the DHCP server to become active and usable, GCE must be installed on the same PC as ETCnomad Eos or Cobalt.

On a Mac, GCE cannot be installed.  This means a third party program or another device must be used as the DHCP server.  We apologize for the incovenience.

Fix/Solution for PC

  1. Download the GCE installer here.
  2. Double click the file you download to run the installer.
  3. Follow the on screen prompts.

 

  • Was this article helpful?