Skip to main content
Electronic Theatre Controls Inc

ETCNet2 Nodes Used with Designer Worksheet on Expression Consoles

Important-Icon.png

The information in this post is provided to assist in troubleshooting. Perform work at your own risk. ENSURE ANY POWER FROM DEVICES HAS BEEN DISCONNECTED BEFORE SERVICING ANY EQUIPMENT. If you do not feel comfortable performing the work, please contact us or your local service center. Be aware that ETC and its Affiliates are not responsible for any damage or injury caused by service of our products by anyone other than us or our authorized service providers, and such damage is excluded from the product’s warranty.

Explanation

The Expression family had an add on product called Designer Worksheet.  This is a Kurta tablet that could be connected to the Expression console.

Does it work?

Unfortunately, ETCNet2 nodes do not work reliably on a system with Designer Worksheet.  It is not recommended that ETCNet2 nodes be used with a Kurta tablet or Designer Worksheet (or any other digitizer).  DMX output should still function just fine.

  • Was this article helpful?