Obsession I and II Device Types
Device types are used by the Obsession code to uniquely identify different types of Obsession I/II hardware.
Note that in Obsession software version 4.0 additions were made to the list of device types, which changed the device type numbers for several devices. If an I/O config from a 2.x show is used in a 4.x system, these device type differences will cause bizzare problems.
Device types in version 2.x:
0 = Full Console (Main)
1 = Full Console (Backup)
2 = RPU A
3 = RPU B
4 = Remote Console (OBSN 1)
5 = DRC (OBSN 1)
6 = Remote Display Control (Never built)
7 = RIU
8 = RVI
9 = RFU
10 = Touchpad RFU
11 = Remote Submaster Console (Kennedy Center)
12 = Remote Playback Console (Kennedy Center)
13 = No Device (or unknown device)
Device types in version 4.x:
0 = Full Console (Main)
1 = Full Console (Backup)
2 = RPU A
3 = RPU B
4 = Remote Console (OBSN 1)
5 = Remote ML Console (Never built)
6 = DRC (OBSN 1)
7 = ML DRC (Keyboard side)
8 = Remote Display Control (Never built)
9 = RIU
10 = RVI
11 = RFU
12 = Touchpad RFU
13 = Remote Submaster Console (Kennedy Center)
14 = Remote Playback Console (Kennedy Center)
15 = ML DRC (LCD side)
16 = OBS2 Facepanel
17 = OBS2 Remote Submaster
18 = OBS2 ML DRC