CR2032 Battery Holder for replacing BT161
For further information, see CMOS (BIOS) Battery Information.
This CMOS battery holder replaces the stock CMOS battery found in several ETC products, including some Eos family consoles and devices, Paradigm Central Control Server and Paradigm Touchscreen Interface, and Net3 Conductor.
A standard CR2032 battery (sold separately) should be inserted into the battery holder prior to installation. ETC sells these batteries as part number BT130.
Compatibility
This battery holder is wired with standard polarity and is compatible with the following products:
- Ion Xe and Ion Xe 20
- Element 2
- Gio @5
- RVI3 (units with USB-C ports)
- RPU3 (units with DisplayPort connectors)
- Ion Xe RPU
- Eos Remote Interface
- Eos Expansion Processor
- Puck Gen 2
- Puck Gen 3
see ETCnomad Puck Hardware Revisions
- Rev. C Conductor, P-CCS, and P-TSI
Incompatibility
This battery holder is not compatible with the following products, which require a battery wired with reverse polarity. ETC does not currently sell a reverse polarity battery holder.
- Puck Gen 1
- Puck Gen 4-6
see ETCnomad Puck Hardware Revisions
- Rev. A Conductor, P-CCS, and P-TSI
see Conductor, P-CCS, and P-TSI Hardware Revisions
Installing a battery holder with the incorrect polarity for your device may cause minor damage to the motherboard. Double-check the polarity of your device before replacing a battery.
