Skip to main content
Electronic Theatre Controls Inc

ColorSource Spot Fixtures and Wireless RF Interference

There have been a small number of reports of ColorSource fixtures interfering with Wireless RF traffic.  

ColorSource products have all been tested to the UL/ETL and CE standards and fall within the necessary radiated emissions levels that those regulatory bodies require.  However, that does not mean that there are no emissions occurring, so there may be some things to try. 

  • Make sure that any wireless antennas being used are not in close proximity to ColorSource Spot fixtures (or any other electronics for that matter).
  • Swap the ColorSource Spot fixture nearest the antenna with another fixture to see if the problem is isolated to a particular fixture.

If you are still experiencing issues, please contact Tech Support for more help at 800-688-4116.



  • Was this article helpful?