Skip to main content
Electronic Theatre Controls Inc

My Yoke Won't Clear the Powercon Connector on my Desire D60 Fixture

Symptoms/Issue

When tilting the fixture, the Powercon connector makes contact with the yoke, making it difficult to pass the yoke over the back of the fixture

Description/Explanation of Issue

There have been changes to wire gauge and the size of the connector over the years, and some power cables stick out too far to easily clear the yoke

Fix/Solution

  1. ETC is extending the length of the yoke by a small amount to allow clearance
  2. This will be implemented and available in Summer 2019
  3. If you're interested in purchasing a new, longer yoke for your existing fixtures, please contact your favorite ETC dealer

 

 

  • Was this article helpful?