Skip to main content

 

Electronic Theatre Controls Inc

What Does the Serial Port Do on the Back of a Net2 Node?

You can:  

  • See what version of software is loaded
  • Change from Net1 to Net2
  • Restore factory defaults 
  • See/Change the IP Address
  • See/Change the Subnet Mask
  • See/Change the Router IP Address
  • Reboot Node

What's needed: 

  • Terminal software set at 9600 8N1 
  • Serial Port on PC
  • Serial Cable
  • Female turn-around
  • Null Modem Adaptor
  • Was this article helpful?