Beam Size Requirements

All ETC hoists have minimum beam size requirements for proper support.

Always check with a structural engineer to make sure that the total structure can support the weight of the hoist and the load it will be supporting.

P650E/P800G/P1000E/P1300G/P2

• Minimum Flange Width = 4"
• Minimum Flange Thickness = 1/4" 

P1500E/P1900G/V1000S

• Minimum Flange Width = 6"
• Minimum Flange Thickness = 3/8"

P75

• Minimum Flange Width = 4"
• Minimum Flange Thickness = 3/8"

Vortek

• Minimum Flange Width = 4.5"
• Minimum Flange Thickness = 1/4"

Compression Tube Beam Clamp

• Minimum Flange Width = 4"
• Maximum Flange Width = 14"
• Minimum Flange Thickness = 1/4"