All ETC hoists have minimum beam size requirements for proper support.
Always check with a structural engineer to make sure that the total structure can support the weight of the hoist and the load it will be supporting.
P650E, P800G, P1000E, P1300G, P2, P2-300/400, P2-600/400
- Minimum Flange Width = 4"
- Minimum Flange Thickness = 1/4"
P1500E, P1900G, P2-900/400, V1000S
- Minimum Flange Width = 6"
- Minimum Flange Thickness = 3/8"
P75
- Minimum Flange Width = 4"
- Minimum Flange Thickness = 3/8"
Vortek NXT
- Minimum Flange Width = 4.5"
- Minimum Flange Thickness = 1/4"
Compression Tube Beam Clamp
- Minimum Flange Width = 4"
- Maximum Flange Width = 14"
- Minimum Flange Thickness = 1/4"
