Slope Parallel to Compression Tube
Prodigy P1 and P2 Powerheads can be mounted on a sloped ceiling/beams (parallel to the powerhead/compression tube) up to 2° with the powerhead mounted on the low end of the slope.
Slope Perpendicular to Compression Tube
Prodigy P1 and P2 Powerheads can be mounted on a sloped beam up to 2° (perpendicular to the powerhead/compression tube). The powerhead and compression tube beam clamps should be tight on the steel.
For compression tube hoists the lift lines will exit the loft blocks at an angle matching the slope of the beam.
For slope angles greater than 2° please contact ETC Technical Services or your ETC Project Manager.
