- Sola Series fixture with USB update port
- USB drive with proper *.NCW upload file
- Apply power to the fixture
- After fixture has homed, plug the USB drive into the USB socket on the fixture
- Enter the menu system by pressing and holding the MODE/ESC button
- Navigate to Set → USB Update and press Enter button
- Use the menu buttons to select the proper *.NCW file and press the Enter button to select the file
- The "Update Fixture?" box will pop up on the display. Select YES and press Enter
Do not remove the USB drive while the read LED is lit.
- After updating all processors, the display will read SUCCESS and the fixture will restart and home.
- Remove the USB drive from the fixture