Connecting to RigPOV Camera
Items Needed
- RigPOV Camera installed on the fixture
- Personal computer
- Ethernet cable connecting from your fixture's camera port to your laptop
Connecting to RigPOV Camera
Connecting to your camera should not take to long. Follow the below steps to get a live view and connected to your camera.
Steps to connect
1. Power on the fixture.
2. Connect one end of the Ethernet cable to the Camera port on the fixture and the other end to an Ethernet port on your PC.
3. Open a browser window on your PC.
4. Type the camera's default IP address (192.168.1.188) into the browser's address bar and press Enter. The AIDA Imaging web interface opens.
5. The Username and Password are both "admin". Type the username and password into the Welcome dialog box and select Login to open the configuration web page for your camera.
6. Select Settings on the far right edge of the web page.
7. Select IP/Ethernet Settings.
8. Type a new IP address into the IP field, and type a subnetmask address into the Netmask field.
9. Select Confirm to save your changes. The camera is now ready to connect to your lighting network using the assigned IP address.
Additional Settings
As necessary, you can change other settings on the camera. For example:
• Settings > Video Encode Settings - Set the resolution of the camera.
• Settings > NDI/Stream Settings - Name your camera.
• Image Effects - This tab at the top of the web page lets you mirror or flip the camera image.