Solapix 19 will not upload the 5U board

Symptoms/Issue

When uploading software from 1.4.8 to software 1.4.9, the 5U board may not take the upload

Description/Explanation of Issue

All the board will take the upload and except the 5U board.  This may or may not happen when doing the upload.  Verify that all boards have taken the upload

Fix/Solution

1. Power down your fixture
2. Get the uploader and only use the 5 board file
3. Connect the uploader to the fixture
4. Apply power to the fixture and then start the upload of the 5 board file
5. The 5U board should then be uploaded
6. Verify upload

Related Links/References