Skip to main content


Electronic Theatre Controls Inc

Cross loading the 575


Fixture has old software


  1. Daisy chain all fixtures to be uploaded.
  2. Make sure fixture with the latest software is a the beginning of the daisy chain.
  3. Fixtures should not be connected to DMX from a console
  4. Hold <menu> button on the master fixture, until ADDR appears
  5. Using the up and down buttons, scroll to Mode and hit <ENTER>
  6. Using the up and down buttons, scroll to ti XLd appears hit <ENTER>
  7. The fixtures that are uploading the software will display UPLD during the process
  8. After the fixtures have uploaded, they will reset and home

Related Links/References

  • Was this article helpful?