Skip to main content


Electronic Theatre Controls Inc

Trackspot will not power on


The unit will not power on and all of the fuses are good.

Description/Explanation of Issue

This is usually due to a faulty voltage select switch.  With the fixture plugged into power push inward on the voltage select switch as if about to adjust the voltage. If the unit powers on when the voltage select switch is pushed then the switch will need to be replaced. 


  1. Replace voltage select switch if available
  2. Bypass the voltage select switch based on the input power (see first diagram below).
  3. If the colors do not match the first diagram refer to the second diagram for the equivelent wire colorsv select bypass.jpg

Voltage  select old to new wiring.JPG

  • Was this article helpful?