Skip to main content
Electronic Theatre Controls Inc

Analog Address Defaults and Cheat Keys

The information in this post is provided to assist in troubleshooting. Perform work at your own risk. ENSURE ANY POWER FROM DEVICES HAS BEEN DISCONNECTED BEFORE SERVICING ANY EQUIPMENT. If you do not feel comfortable performing the work, please contact us or your local service center. Be aware that ETC and its Affiliates are not responsible for any damage or injury caused by service of our products by anyone other than us or our authorized service providers, and such damage is excluded from the product’s warranty.

Question

What are the methods to deep clear or reset an Analog address processor to factory defaults?

Answer

To restore default settings on the AAS processor:

Hold Down one of following buttons and toggle Reset\Normal switch to perform the function.

[Dimmer Up] Rebuilds all defaults (1-to-1 Patch)
[Dimmer Down] RAM Test
[Exit] EEROM Test
[Enter]  Clears all patch


While in Monitor Mode:

Users can make the following changes by pressing the button.

[Dimmer Up] Toggles Worklight circuit on/off
[Dimmer Down] Toggles Panic circuit on/off
[Edit Up] [Edit down] Toggles through the 8 take control lines
  • Was this article helpful?