Skip to main content
Electronic Theatre Controls Inc

Echoflex ER6CD 600W Phase Adaptive Dimmer Does Not Output Out of Box


My Echoflex 600W Phase Adaptive Dimmer (ER6CD) does not turn on its output load right out of the box with no control stations or sensors linked.

My ER6CD does not blink the load on/off when in Learn mode.

Description/Explanation of Issue

This is a known bug in ER6CD-BU v1.0.0. It has been resolved in v1.1.0. The unit should work as expected once you link any sensor or station to it.


  1. Link a sensor or station to the ER6CD
  2. If this does not resolve the issue or you are not satisfied with the solution, please contact ETC Technical Services.
  • Was this article helpful?