Echoflex Dimmer LED Status Does Not Match Manual
Symptoms
The LED indicators on an Echoflex Phase Dimmer (ER6CD and ER12CD) do not behave as expected per the installation documentation.
Explanation of Issue
As of September 26, 2022, all Echoflex Phase Dimmers with a -BU model number (e.g. ER6CD-BU 120) had the following issues with their LEDs:
- The PWR and LEARN LEDs were reversed. For example, in Learn mode, the PWR LED goes solid, and the Learn LED blinks.
- When clearing a dimmer to pre-commissioned or factory defaults, the LEDs will go solid first for pre-commission clear, and then start blinking for factory clear.
These issues were resolved in firmware version 1.2.0, released on November 8th, 2022.