Paradigm Hardware Compatibility
Introduction
The information below outlines which versions of Paradigm software/firmware each Paradigm hardware is compatible with. Typically this is delineated by the product's part number, but in a few cases the serial number will be the key to knowing what software version is compatible.
This article was last updated as of Paradigm v5.0.2 Bundle, thus any version listed as "Current" equals v5.0.2.
Processors / Servers
The versions listed are those that can run directly on the processor or server.
Product Name / Model | Part Number (PN) | Versions Actively Shipped With | Versions Supported |
---|---|---|---|
Paradigm Architectural Control Processor (P-ACP) (all serial numbers pre-445001678) |
7180A1001 | v1.0.0 - v1.1.2 | v1.0.0 - Current |
Paradigm Architectural Control Processor (P-ACP) (starting serial number of 445001678) |
7180A1001 | v1.1.2b - v2.0.2 | v1.1.2b - Current |
Paradigm Architectural Control Processor (P-ACP) (starting serial number of 445008001) |
7180A1001 | v2.0.3 - v2.0.5 | v2.0.3 - Current |
Paradigm Architectural Control Processor (P-ACP 2) | 7180A1009 | v2.0.5b - v4.1.0 | v2.0.5b - Current |
Paradigm Architectural Control Processor (P-ACP 3) | 7180A1029 | v4.1.1 - Current | v4.1.1 - Current |
Paradigm Central Control Server (P-CCS R1)* | 7180A1150 | v2.0.1 - v2.1.3 | v2.0.1 - Current |
Paradigm Central Control Server (P-CCS R2) | 7180A1160 | v3.0.0 - v3.1.x | v3.0.0 - Current |
Paradigm Central Control Server (P-CCS R3) | 7180A1170 | v4.0.0 - Current | v4.0.0 - Current |
Paradigm Central Control Server (P-CCS R5)** | 7180A1180 | v5.0.2 - Current | v4.0.0 - Current |
*P-CCS R1 does not support the Energy Management feature available in v4.0.0 and higher
**P-CCS R5 does not have a LCD on the front like R2/R3, but supports the same features. It shares software compatibility with the R3.
Station Power Supplies
The P-NSPS-D is currently the only station power supply that contains software and thus has a compatibility requirement, which is the Processor version. All other P-SPM/P-REP variants contain no software, and thus will work with all versions of P-ACPs and Lon stations. All serial numbers of a particular part number share the same version compatibility.
Product Name / Model | Part Number (PN) | Versions Actively Shipped With | Versions Supported |
---|---|---|---|
Paradigm Station Power Module (P-SPM) | 7182A1001 | v1.0.0 - v4.2.0 | N/A |
Paradigm Station Power Module Enclosure (P-SPM-E) | 7182A1701 | v4.2.1 - Current | N/A |
Paradigm Station Repeater Module (P-REP / P-REP-WM / P-REP-RM) |
7180A1001 7182A1007 7182A1010 |
v1.0.0 - Current | N/A |
Paradigm Station Dual Repeater Module (P-DREP / P-DREP-WM / P-DREP-RM) |
7182A1006 7182A1008 7182A1011 |
v1.0.0 - Current | N/A |
Paradigm Network Station Power Supply Din (P-NSPS-D) |
7182A1711 | v5.0.0 - Current | v5.0.0 - Current |
Touchscreens & Touchscreen Interfaces
The versions listed are those that are directly loaded on the touchscreen/interface hardware. All serial numbers of a particular part number share the same version compatibility. The Wireless Access Station (P-LCD-WAS) is un-serialized.
Product Name / Model | Part Number (PN) | Versions Actively Shipped With | Versions Supported |
---|---|---|---|
Paradigm 7" LCD (P-LCD) | 7184A1500-X X = Color (1, 2, 3, 4, or 5) |
v1.0.0 - v2.1.2c | v1.0.0 - v3.1.0 |
Paradigm 7" LCD Portable (P-LCD-P) | 7184A1530 | v1.1.0 - v2.1.2c | v1.1.0 - v3.1.0 |
Paradigm 7" LCD Handheld (P-LCD-H) | 7184A1510 | v2.1.0 - v3.1.0 | v2.1.0 - v3.1.0 |
Paradigm Handheld Touchscreen Dock (P-LCD-DOCK) | 7184A1512 | v2.1.0 - Current | v2.1.0 - Current |
Paradigm Handheld Touchscreen Wireless Access Station (P-LCD-WAS) |
7184B2000 | v2.1.0 - Current | v2.1.0 - Current |
Paradigm 7" Touchscreen (P-TS7) | 7184A1501-X X= Color (1, 2, 3, 4, or 5) |
v2.1.2c - Current | v2.1.2c - Current |
Paradigm 7" Touchscreen Ethernet (P-TS7-E) | 7184A1541-X X= Color (1, 2, 3, 4, or 5) |
v5.0.2 - Current | v5.0.2 - Current |
Paradigm 7" Touchscreen Portable (P-TS7-P) | 7184A1531 | v2.1.2c - Current | v2.1.2c - Current |
Paradigm 7" Touchscreen Portable Ethernet (P-TS7-PE) | 7184A1532 | v2.1.2c - Current | v2.1.2c - Current |
Paradigm 7" Touchscreen Handheld (P-TS7-H) | 7184A1556 | v3.1.1 - Current | v3.1.1 - Current |
Paradigm 18" Touchscreen R1 (P-TS18 R1) | 7184A1551 | v2.1.0 - 2.1.2c | v2.1.0 - Current |
Paradigm 18" Touchscreen R2 (P-TS18 R2) | 7184A1553 | v3.0.0 - Current | v3.0.0 - Current |
Paradigm Touchscreen Interface R1 (P-TSI R1) | 7184A1550 | v2.1.0 - 3.1.0 | v2.1.0 - Current |
Paradigm Touchscreen Interface R2 (P-TSI R2) | 7184A1560 | v4.0.0 - Current | v4.0.0 - Current |
Stations / Responsive Controls
The versions listed below are the Processor versions the stations shipped alongside and are compatible with. The stations themselves run firmware versions that differ from the overall Paradigm bundle version and - except where noted - all station firmware versions are compatible with the listed Paradigm version. All stations are un-serialized.
Product Name / Model | Part Number (PN) | Versions Actively Shipped With | Versions Supported |
---|---|---|---|
Paradigm Heritage and Heritage Portable Stations (UHXXXXX / UHXXXXX-XP) |
7181B20YY 7181B20YY-XP Y = PN for station type X = Color |
v1.0.0 - Current | v1.0.0 - Current |
Unison Heritage Contact Lamp Interface 16 I/O | 7181A1026 7181B1021 |
v1.0.0 - Current | v1.0.0 - Current |
Unison Heritage Contact Interface 8 I/O (UHCI-RM / UHCI-WM) | 7181A1021 7181A1022 7181A1083 7181B1022 |
v1.0.0 - Current | v1.0.0 - Current |
Unison Heritage Contact Station 4 I/O (UHCI-4) | 7181A1020 | v1.0.0 - Current | v1.0.0 - Current |
Unison Heritage Fader Interface (UHFI) | 7181A1023 7181A1084 7181B1023 |
v1.0.0 - Current | v1.0.0 - Current |
Unison RS232 Serial Interface Station (UH1AV) | 7181B2031 | v1.0.0 - Current | v1.0.0 - Current |
Unison Heritage Portable Receptacle Stations (UH1RS) | 7181B2032 | v1.0.0 - Current | v1.0.0 - Current |
Paradigm Inspire Button Stations (PI100X - 1, 2, 4, 6, and 8 button variants loaded with v1.0.0 station firmware) | 7185B210Y-X Y = # of buttons X = Color (1, 3, 4 or 5) |
v3.1.1 - Current | v3.1.1 - Current |
Paradigm Inspire Button Stations (PI100X - 1, 2, 4, 6, and 8 button variants loaded with v1.1.0 or higher station firmware) | 7185B210Y-X Y = # of buttons X = Color (1, 3, 4 or 5) |
v4.0.0 - Current | v3.1.1 - Current |
Paradigm Inspire Fader Station (PI1104 - 4 button with fader loaded with v1.1.0 or higher station firmware) | 7185B2110-X X = Color (1, 3, 4, or 5) |
v4.0.0 - Current | v4.0.0 - Current |
Paradigm Light Sensor (P-LS) | 7184A1451 (white) 7184A1451-4 (black) |
v2.0.4 - Current | v2.0.4 - Current |
Paradigm Occupancy Sensor (P-OCC / P-OCC-SR / P-OCC-HCM) |
7184A1401 7184A1402 7184A1403 add -4 to any for black |
v2.0.4 - Current | v2.0.4 - Current |
Paradigm Dual Tech Occupancy Sensor Ceiling (P-DOC-C-LR / P-DOC-C-SR / P-DOC-C-HC) |
7184A1410-X 7184A1411-X 7184A1416-X X = Color (4 or 5) |
v3.1.1 - Current | v3.1.1 - Current |
Paradigm Dual Tech Occupancy Sensor Wall Mount (P-DOC-W-NR / P-DOC-W-WD) |
7184A1412-X 7184A1413-X X = Color (1, 4, or 5) |
v3.1.1 - Current | v3.1.1 - Current |
Paradigm Dual Tech Occupancy Sensor Switch Mount (P-DOC-SM1 / P-DOC-SM2) |
7184B2102-X 7184B2103-X X = Color (1, 3, 4, or 5) |
v3.1.1 - Current | v3.1.1 - Current |