Skip to main content
Electronic Theatre Controls Inc

Changing the 3D Model a Fixture Profile Displays

Issue

When patching a fixture type, the 3D model displayed in Augment3d is either incorrect or you desire a different model be displayed instead.

Changing a fixture model will change it for all instances of that fixture type. 

Solution

  1. Navigate to Patch
  2. Press {S5} for Fixtures
  3. Select the fixture profile you wish to modify from the list
  4. Press {S4} for Physical Data
  5. Click on "Fixture Model" and select the desired model from the list
  6. Press {OK} to commit the change

Fixture_model_select.png

  • Was this article helpful?