Skip to main content
Electronic Theatre Controls Inc

Dimmer Fixture Defaults and Ranges

Beam Angle

The default (no entry) Beam Angle is 36°.

Beam Angle ranges from 1° to 179°.

Setting the Beam Angle to 0° or using the command {Beam Angle}[Enter] will reset the Beam Angle to default.

Beam Edge

The default (no entry) Beam Edge is 50 (producing a hard edge on the ground).

The Beam Edge ranges from 0 to 100.

Using the command {Beam Edge}[Enter] will reset the Beam Edge to default.

Note: Decimal values are not supported in either Beam Angle nor Beam Edge

  • Was this article helpful?