Skip to main content
Electronic Theatre Controls Inc

Cobalt 20 Hardware Revisions

 

Important-Icon.png

The information in this post is provided to assist in troubleshooting. Perform work at your own risk. ENSURE ANY POWER FROM DEVICES HAS BEEN DISCONNECTED BEFORE SERVICING ANY EQUIPMENT. If you do not feel comfortable performing the work, please contact us or your local service center. Be aware that ETC and its Affiliates are not responsible for any damage or injury caused by service of our products by anyone other than us or our authorized service providers, and such damage is excluded from the product’s warranty.

Identifying Cobalt 20 hardware revision

This information is important when ordering spare parts or re-imaging. All Cobalt hardware runs Win7 only.

There are 2 main versions of Cobalt 20, denoted by the motherboard installed.
 
Revision Display Connectors
Ti/Cobalt Carrier Board 3x DVI
Universal Carrier Board (UCB) 3x DisplayPort

 

Images

Rear of Ti/Cobalt Carrier Board console Cblt Carrier-CROPPED.png
Rear of UCB console UCB-CROPPED.png
  • Was this article helpful?