Re-Image Instructions | Eos RPU3 with DisplayPort | From v2.6.4 and Earlier
- Last updated
- Save as PDF
Want a printable PDF of these instructions? Click the PDF Icon above the Table of contents! |
Required Materials
- USB Re-Imaging Drive
- (provided by ETC)
- This should have a label of 4250D1020-x.x.x
- This typically ships as part of the 4350K1007 - EOS FAMILY WINDOWS 7 IMAGE UPGRADE KIT
- A separate USB Drive
- Used to backup show files and existing settings
- USB Keyboard
- USB Mouse
1) Backup Your Data
Backup Settings and Show Files
Additional Required Materials
In addition to the materials previously listed above, you will need to download and print out the Eos Family Settings Spreadsheet.
|
![]() |
|
![]() |
|
![]() |
Export Button Configuration
|
![]() |
2) Re-Image Your Console
One Time Boot into ETC Console Image Utility
|
![]() |
|
|
Re-Install the Disk Image
|
![]() |
|
![]() |
|
![]() |
The USB imaging drive should remain in the console for installation of software. Do not remove it until the process is complete.
Automated Console Setup Utility
|
![]() |
|
![]() |
3) Restore Your Data
|
![]() |
|
![]() |
Import Button Configuration
|
![]() |