Re-Image Instructions | Eos Ti with DVI | From v3.0.0 and Higher
- Last updated
- Save as PDF
Want a printable PDF of these instructions? Click the PDF Icon above the Table of contents! |
Required Materials
- USB Re-Imaging Drive
- (provided by ETC)
- This should have a label of 4250D1020-x.x.x
- This typically ships as part of the 4350K1007 - EOS FAMILY WINDOWS 7 IMAGE UPGRADE KIT
- A separate USB Drive
- Used to backup show files and existing settings
- USB Keyboard
- USB Mouse
1) Backup Your Data
Backup Show Files and System Settings
|
![]() |
|
![]() |
Export Button Configuration
|
![]() |
2) Re-Image Your Console
One Time Boot into ETC Console Image Utility
|
![]() |
|
|
Re-Install the Disk Image
|
![]() |
|
![]() |
|
![]() |
The USB imaging drive should remain in the console for installation of software. Do not remove it until the process is complete.
Automated Console Setup Utility
|
![]() |
|
![]() |
|
![]() |
3) Restore Your Data
|
![]() |
|
![]() |
Import Button Configuration
|
![]() |
4) Check Network Settings
- Exit out to the shell
- Navigate to Settings>Network
- Check if you have 1 port listed or 2 ports listed. If your console only has 1 port, please take a look at this article: