Error when Imaging Eos RPU
Click here for the article regarding "What is a UCB vs pre-UCB console?"
While using the ETConsole Image drive, I received an error on the "ETC Automated Console Setup" screen.
The Error reads:
"Could not install software automatically. No server configuration file loaded."
The console cannot find the files it needs on the image drive. The Image drive needs to be plugged into a specific USB port. To resolve this, please follow the steps below.
- Remove the USB Image drive from the console.
- Insert the USB Image drive into the back center port of the console. See Image below.
- The console should clear the error and continue the imaging process.
**If the console does not continue with the Imaging process, or the USB Image drive is already in the correct USB port, please contact ETC Technical Services.