Skip to main content

 

Electronic Theatre Controls Inc

Touch-up paint for Unison and Sensor racks

If you wish to repair small cosmetics damages to your ETC Sensor and Unison racks you can order touch up paints through your local ETC dealer.

If you have a Sensor Classic, CEM+ , or Unison rack you need ETC part number PT143.

If you have a CEM3 rack you need ETC part number PT150.

It is important to note that the original paint that was used to paint your racks at ETC was applied through an electro-static powder coat and baked on process and is not a liquid paint.  The paint that will come as part PT143 is a liquid aerosol paint, and while it will match the color of the original powder coat finish, the texture will be slightly different.

 

  • Was this article helpful?