Skip to main content
Electronic Theatre Controls Inc

Metering Output from BluesSystem Power Supply


What does each line from the output header on a BluesSystem power supply do and what should I see when metering?


There are three lines for each output header, which you can see on page 16 of the installation manual:

  • Power: provides power to fixtures
  • Ground: acts as common
  • Control: provides dimmable control to fixtures

You should see the following when metering the output lines:

  • Power/Ground: 24VDC on the One Zone Power Supply and 36VDC on the Six Zone Power Supply
  • Control/Ground:
    • 10VDC when at full via DMX
    • 0 VDC when at 0 via DMX

Related Links/References

  • Was this article helpful?