Explanation
The following fixtures are self-terminated DMX at end of line and do not require additional termination.
- All Series 3 S4 LED fixtures
- All Series 2 S4 LED fixtures
- All Series 1 S4 LED fixtures
- All fos/4 family fixtures
- D40 (indoor only, not XT or XTI)
- D60 (indoor only, not XT or XTI)
- D22 Canopy DMX fixture (Manual dip switch for termination)
- Irideon WLZ Canopy DMX fixture (Manual dip switch for termination)
- Irideon FPZ Canopy DMX fixture (Manual dip switch for termination)
The following fixtures are not self-terminated and require a 120-ohm resistor at end of line for DMX Termination.
- Arcsystem fixtures (all)
- BluesSystem power supplies
- Relevé
- Selador fixtures
- S4WRD
- ColorSource Fixtures (Spot, PAR, Cyc, and Linear)
