Navis White Fixtures Seem Too Dim

Symptoms/Issue

All Navis White fixtures on an F-Drive output are too dim.

Description/Explanation of Issue

As of F-Drive software 1.1.3, the default drive current for CC-150 outputs is 200mA, down from the previous current of 600mA. Navis White fixtures are intended for use with a 600mA drive current, so when using these fixtures, the drive current must now be increased from its default using Concert during initial installation.

This will only apply to new configurations. An F-Drive with an existing configuration that is upgraded in the field to 1.1.3 or higher will use whatever settings it was previously configured with.