Power Diagram for White Navis 100 Chains

Fixed White and Fade to Warm variants of the Navis 100 are designed to be completely plug and play with no need for configuration. Rather than using traditional addressing methods to assign fixture channels, we use the fixture's position in the data chain to determine channel number. Each fixture is powered by pins 1 and 5 on the RJ45 connector and then re-patches the rest of the input signals to a different set of pins on the output port, so that the next fixture downstream receives the next channel's power. The diagram below indicates the pinout and power flow across a full 4 fixture chain.  

This information does not apply to RGBW Navis fixtures, which have their own method of communication.