Which ETC Lights are Self-Terminated

Automatically Self-Terminated

The following fixtures self-terminate when there is nothing connected to their DMX thru, and do not require additional terminators at the end of the DMX line. 

• All Series 3 S4 LED fixtures
• All Series 2 S4 LED fixtures
• All Series 1 S4 LED fixtures
• All fos/4 family fixtures
• D22 Portable
• D40 (indoor only)
• D60 (indoor only)
• Desire Fresnel

Manually Self-Terminated

The following fixtures have a termination switch that must be set to "on" only when the fixtures is installed at the end of a DMX line.

• D22 Canopy DMX fixture 
• Irideon WLZ Canopy DMX fixture
• Irideon FPZ Canopy DMX fixture
• D40 XTI (switch is located on the XTI term board)
• D60 XTI (switch is located on the XTI term board)

Not Self-Terminated

The following fixtures are not self-terminated and require a 120-ohm resistor at end of line for DMX Termination.

• D40XT
• D60X
• Arcsystem fixtures (all)
• BluesSystem power supplies
• Relevé
• Selador fixtures
• All Source 4WRDs
• All ColorSource V Fixtures
• All ColorSource Fixtures
• Track Mount Fixtures (terminate at the end of the track)

Related Links:

• DMX 512 Info - Electronic Theatre Controls Inc
• ETC Part SGE1507 - XLR DMX Terminator - ETC, Inc. - US
• ETC Part N4086 - RJ45 DMX Terminator - ETC, Inc. - US