Skip to main content

 

Electronic Theatre Controls Inc

Neutral Quad Lugs for Sensor Racks

If you need quad lug on your Neutral for a standalone or bussed rack: 

Neutral-Quad-Lugs-for-Sensor-Racks.jpg

For each quad neutral feed send: 

2        J30004-F 
4        HW553 
4        HW5137 

It will replace existing lugs. 

If you need a quad lugs for Phase bars on standalone rack: 

For each phase send: 

2        SGJ1266 
2        HW553 
2        HW5137 

It will replace existing lugs. 

If you need a quad lugs for Phase bars on bussed racks: 

For each phase send: 

1        J365 
1        HW5169 
1        HW511 
1        HW5137 

It will be in addition to existing lugs. 

Don’t forget to mention to the contractor that anytime an aluminum lug gets attached to a copper bus it needs Noalox or equivalent corrosion inhibitor.

  • Was this article helpful?