Skip to main content
Electronic Theatre Controls Inc

How to Save and Load a Configuration to a CEM3 Processor

  1. Last updated
  2. Save as PDF

Tools Required

  1. A USB Drive formatted to FAT32

Saving a Configuration

  1. Place the USB thumb drive in front USB port on the processor.
  2. Press the 'Setup' button.
  3. Navigate to 'File Operations' and press enter.
  4. Choose 'Save to USB' and press enter.
  5. The racks name will be displayed, as "RACKNAME.etc"
  6. Choose "OK"
  7. Saving will take around 20 seconds, once the save is complete the processor will return 'File Operations' menu.

Loading  a Configuration

  1. Place the USB thumb drive in front USB port on the processor.
  2. Press the 'Setup' button.
  3. Navigate to 'File Operations' and press enter.
  4.  Choose 'Load from USB' and press enter.
  5.  Select the file you wish to load.
  6. Choose OK
  7. Loading will take approximately 15 seconds, once the load is complete the processor will return 'File Operations' menu.
  1. Back to top
  • Was this article helpful?

Recommended articles

  1. Article type
    How-to
  2. Tags
    This page has no tags.