Skip to main content
Electronic Theatre Controls Inc

Sensor Classic Low Voltage Pinout (J2)

This pinout can also be found in the Sensor Installation Guide

Pin Signal
1 DMX A -
2 DMX A +
3 DMX A/B Common
4 Panic In (Usually switched with Pin 6)
5 Beacon Drive
6 Panic +10 VDC (Usually switched with Pin 4)
7 Panic Out Common
8 Panic Out 12Vdc (Used to drive Panic indication LED's/lamps)
9 DMX B -
10 DMX B +
11 ETCLink Voltage +12Vdc
12 ETCLink Voltage Common
13 ETCLink Data
14 ETCLink Data
  • Was this article helpful?