Sensor Classic Low Voltage Pinout (J2 Pinout)
This pinout can also be found in the Sensor Installation Guide
| Pin | Signal |
|---|---|
| 1 | DMX A - |
| 2 | DMX A + |
| 3 | DMX A/B Common |
| 4 | Panic In (Usually switched with Pin 6) |
| 5 | Beacon Drive |
| 6 | Panic +10 VDC (Usually switched with Pin 4) |
| 7 | Panic Out Common |
| 8 | Panic Out 12Vdc (Used to drive Panic indication LED's/lamps) |
| 9 | DMX B - |
| 10 | DMX B + |
| 11 | ETCLink Voltage +12Vdc |
| 12 | ETCLink Voltage Common |
| 13 | ETCLink Data |
| 14 | ETCLink Data |