Skip to main content
Electronic Theatre Controls Inc

Wiring Guidelines - QuickTouch

  1. Last updated
  2. Save as PDF

The following guidelines should be used for laying out control wiring for a QuickTouch Rigging Control System.

  1. A maximum of 24 Hoists can be connected to a QuickTouch Rigging Controller.
  2. The total combined length of Hoist Control (C) wiring and E-stop (ES) wiring runs cannot exceed 500 feet (150 meters).
  3. A maximum of 3 E-stop Button Stations can be used per system.
  4. All Hoist Control and E-stop runs shall be continuous, unspliced runs.
  5. Hoist Control and E-stop wiring must be installed in grounded metal conduit unless shielded cable (Cat5e STP) is used.

All Hoist Control and E-stop wiring runs should be Belden 1583A, or any Cat5e or better cable.

  1. Back to top
  • Was this article helpful?

Recommended articles

  1. Article type
    How-to
  2. Tags
    1. QuickTouch