Skip to main content


Electronic Theatre Controls Inc

Disable Pan and Tilt to Use as Follow Spot in Sola series fixtures


Unable to use fixture as a follow spot.

Description/Explanation of Issue

Pan and tilt can be bypassed to enable the fixture to be used as a follow spot.


  1. Press and hold the left and right arrows on the display menu prior to applying power.
  2. Continue to hold until  "No Movement Reset" appears on the display: clipboard_ef94ff6152454dc2e98d29dadfe0e193d.png
  3. Pan and tilt are now disabled and will move freely by hand.
  4. To re-energize the pan and tilt motors, simply home the fixture from the display/a controller or perform a power reset. 
  • Was this article helpful?