Skip to main content

 

Electronic Theatre Controls Inc

How to change ArtNet IP and Netmask on SolaHybeam Fixtures

This applies to the following fixtures:

  • SolaHybeam 1000

Explanation

When using sACN or ArtNet directly to a fixture, the fixture might need a different IP address to work properly on the network.

Steps to Solution

  1. Navigate in the menu to "Set"
  2. Navigate to "Service Setting"
  3. Enter the service pin - 50
  4. To change the IP address select "Ethernet IP"
  5. To change the netmask, "select Ether MaskIP"

 

  • Was this article helpful?