All SolaFrame 3000 software versions
- Last updated
-
-
Save as PDF
NOTE: Be cautious when downgrading fixture software versions as this can affect many functions such as cooling/thermal adjustments, power adjustments, DMX channel count and the overall functionality of the product. HES recommends always updating to the latest version of released software.
The most recent release can be found on the SolaFrame 3000 product page at:
https://www.etcconnect.com/Products/Live-Events/Lighting-Fixtures/SolaFrame/3000/Software.aspx
If you need an older version of the software, contact ETC Technical Support.
| Version |
Release date |
Fixes |
Download link |
| v1.3.1 |
|
- Initial production release
|
|
| v1.3.2 |
10/17/18 |
- Studios continuous fan mode added
- NEW CMY+CTO curves
- THIS WILL CHANGE THE COLORS PREVIOUSLY PROGRAMMED
|
|
| v1.3.3 |
3/8/19 |
- Default iris homing diameter increased
|
|
| v1.3.4 |
4/4/19 |
- Bug fix causing pan/tilt cross fade jitter
- Bug fix LED/Fixture hour reset
|
|
| v1.3.5 |
8/7/19 |
- Added enhanced protocol mode with linear insertion of the animation wheel and animation wheel rotation stop
- Enhanced protocol can be selected via the menu system: Set > Protocol > Enhanced/Standard or via RDM
- Added pan/tilt encoder disable timeout
- Bug fix for an sACN addressing bug
- Bug fix for defogger mode that left the defogger on when off was selected
|
|
| v1.3.8 |
9/19/19 |
- Improved framing blade control to prevent blades from misstepping
- Not show critical but outgoing fixtures must be updated
|
|
| v1.3.9 |
2/26/20 |
- ***CRITCAL UPDATE***
- Iris acceleration speed adjustment to correct misstepping
- Reduce power by 10% after 2 hours of the framing blades being engaged
|
|
| v1.3.10 |
2/26/20 |
- ***CRITCAL UPDATE***
- Adjustment made to power reduction when framing blades are engaged
- Dual Frost Mode now selected via the menu system: SET > PROTOCOL (Standard/Enhanced/Enhanced Dual Frost)
|
|
| v1.3.11 |
3/9/21 |
- ***CRITCAL UPDATE***
- Improvement made to thermal management to prevent damage to animation wheel in long term use when combined with a gobo.
- When animation and gobo used together gobo blower voltage will be 16vdc
- Bug fixed causing framing blower to ramp up momentarily when intensity drops from 100 to 0 percent.
- Self test functionality improved
|
|
| v1.3.14 |
7/6/21 |
- 100Hz dimming mode added
- Dimming mode selection via the console added
- Zoom movement speed increased
- Adjustment made to power reduction when framing blades engaged in
long term use
- Bug causing fans to power up in continuous modes when dmx is
not applied fixed.
- Variable fan control added to "Enhanced" and "Enhanced Dual Frost" protocol modes
|
SolaFrame 3000 V1314.HYD - Uploader
SolaFrame 3000 V1314.NCW - USB
Zip file
|
| v1.3.17 |
01/14/22 |
- Boot code changes implemented
- DMX to Art-net conversion bug fixed
|
|
| v1.3.18 |
01/18/22 |
- Fix for Fan speed reporting bug causing LED to dim.
|
SolaFrame 3000 V1318.HYD - Uploader
SolaFrame 3000 V1318.NCW - USB
Zip file
|
