Is My Mosaic Controller RDM Capable?
Symptoms/Issue
I am working with RDM devices in my Mosaic configuration, are they compatible?
Answer
Yes. The hardware and Mosaic Designer 2 software supports RDM addressing and mode setting, but only while in Patch and after clicking "Discover".
RDM Device Discovery
RDM devices can be discovered via the DMX port of a MSC, MTPC + TPC RIO, or on an Art-Net universe.
1. Open the Patch tab in Mosaic Designer
2. Highlight the controller you wish to discover on
3. Click the "Discover" button
4. The opened window will display RDM capable devices connected to the selected controller
To identify a device, select the device and toggle the Identify button
To readdress a device, enter a new value in the Start Address column
To set a different Personality, enter a new value in the Personality column
The "Discover" button will only enable if:
-the controller is associated with a physical controller
-the controller has been found on the network
-the current project has been uploaded to the controller
Reference
Information taken from the Unison Mosaic Designer 2 v2.4 software help system.