RD-2031 Jumper Settings
RD-2031 Jumper Settings
[INPUT] to DMX512
Used to convert a protocol input to DMX512.
[INPUT] to AMX192
Used to convert a protocol input to AMX192
[INPUT] to K96
Used to convert a protocol input to K96
These settings do not use the 6-pin jumper header
[INPUT] to D192
Used to convert a protocol input to K96
Conversion from ECMUX to D192 is not available
[INPUT] to AVAB
Used to convert a protocol input to AVAB
Conversion from ECMUX to AVAB is not available
[INPUT] to MICRO2
Used to convert a protocol input to MICRO2
[INPUT] to ECMUX
Used to convert a protocol input to ECMUX
Conversion from D192 or AVAB to ECMUX is not available
Table data from original document is damaged for MICRO2. Unknown what software version to use. Also, all ECMUX conversion requires a different frequency crystal, which is an unknown value.
For all conversion settings, it is unknown what the EC Mz crystal frequency is. That data appears to have been lost.