Skip to main content
Electronic Theatre Controls Inc

Search

  • Filter Results
  • Location
  • Classification
    • Article type
    • Workflow
  • Include attachments
Searching in
About 3 results
  • https://support.etcconnect.com/HES/Consoles/Hog_3/Hardware/Displays%2C_RH3_only_right_display_is_working
    it may be the bios battery has failed and the bios settings have reset. as a test reset bios settings, especially the Graphics Adapter. if the bios changes solve the problem, check the bios battery on...it may be the bios battery has failed and the bios settings have reset. as a test reset bios settings, especially the Graphics Adapter. if the bios changes solve the problem, check the bios battery on the motherboard, it may need to be replaced. the bios document with the correct settings can be found below, and on the High End site under Legacy Products. if the model is not known, comparing what is in the Advanced tab to the document will be easy to determine the correct board.
  • https://support.etcconnect.com/ETC/Consoles/ColorSource/ColorSource_20_and_40/ColorSource_20_or_40_Screen_is_Upside_Down
    LCD is being displayed upside down The reason the screen appears flipped or upside down is due to the display misreading the voltage during boot. This could be caused by a loose connection with the co...LCD is being displayed upside down The reason the screen appears flipped or upside down is due to the display misreading the voltage during boot. This could be caused by a loose connection with the connector from the power supply and the console. Because of this misreading, the screen reverses its display Power the console off for at least 1-2 minutes Power the console back on and make sure the plug is securely connected to the console
  • https://support.etcconnect.com/ETC/Consoles/ColorSource/ColorSource_20_and_40_AV/ColorSource_20_or_40_AV_Screen_is_Upside_Down
    LCD is being displayed upside down The reason the screen appears flipped or upside down is due to the display misreading the voltage during boot. This could be caused by a loose connection with the co...LCD is being displayed upside down The reason the screen appears flipped or upside down is due to the display misreading the voltage during boot. This could be caused by a loose connection with the connector from the power supply and the console. Because of this misreading, the screen reverses its display Power the console off for at least 1-2 minutes Power the console back on and make sure the plug is securely connected to the console